Thecus n5200 Debian

From chaoswiki
Revision as of 17:53, 19 January 2007 by Obri (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Hardwareinfos

lspci

00:00.0 Host bridge: Intel Corporation Unknown device 358c (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Unknown device 358e (rev 02) 00:02.1 Display controller: Intel Corporation Unknown device 358e (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 01:00.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09) 01:01.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05) 01:02.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05) 01:03.0 USB Controller: NetChip Technology, Inc Unknown device 2282 (rev 11)

ttyS0

Verbunden mit dem Seriellen Stecker

ttyS1

Verbunden mit dem Display

OS Installation

mit dem sercon modul von thecus wiki die serielle Console freischalten, auf der Partition /dev/hda1 befindet sich der Grub, man sollte sich nicht vom in dem /boot auf der firmware vorhandenen lilo verwirren lassen.

die menu.lst in /mnt/boot/grub/ wie folgt anpassen:

#boot=/dev/hda
default=0
timeout=10
serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
#serial --unit=1
terminal --timeout=3 serial console
#password --md5 $1$E.mPD1$GCz4omwJYBUhV8.Z8TyJE1
#password ThecusN5200x86in2006
fallback 1

title   Debian Linux
        root(hd0,2)
        kernel (hd0,2)/vmlinuz-2.6.18-3-686 root=/dev/sda1 console=tty1 console=ttyS0,115200n8
        initrd (hd0,2)/initrd.img-2.6.18-3-686

title Normal
#        kernel /boot/bzv0428 ro root=/dev/ram0 ramdisk=32768 console=tty1 console=ttyS0,115200n8
        root(hd0,1)
#        kernel (hd0,0)/bz5200v1 ro root=/dev/ram0 ramdisk=32768 irqpoll acpi=noirq pci=noacpi
#        getkey
        setlogo Thecus N5200
        setbto 200
#        kernel (hd0,1)/bz5200v1 ro root=/dev/ram0 ramdisk=131072 console=tty1 console=ttyS0,115200n8
        kernel (hd0,1)/bz5200v1 ro root=/dev/ram0  ramdisk=40960 console=tty1 console=ttyS0,115200n8
        initrd (hd0,1)/n5200fs.gz

title Factory
#        kernel /boot/bzv0428_old ro root=/dev/ram0 ramdisk=32768 console=tty1 console=ttyS0,115200n8
        root(hd0,5)
        getkey
        setlogo Fallback to Factory
        setbto 200
        kernel (hd0,5)/bz5200mv1 ro root=/dev/ram0 ramdisk=131072
        initrd (hd0,5)/minifs.gz