User:Mar/Thinkpad t61

From chaoswiki
Jump to navigation Jump to search

Hardware

DSC00724.JPG

Übersicht

* CPU                   |->    Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
* Arbeitspeicher        |->    2 GB von "unknowed" !!
* Network / Wlan        |->    Intel(R) PRO/1000 Network / Intel(R) Wireless WiFi Link 4965AGN
* Festplatte            |->    WDC WD1600BEVS-08RST2 160 GB ! von Lenovo find ich schon komisch 
* Grafik                |->    "Nvidia Quadro NVS 140M" mit "NVIDIA UNIX x86 Kernel Module  169.04"
* Bildschirm            |->    LEN (DFP-0)
* Batterie              |->    Lenovo 7.8 AH akku / Ultra slim akku 2.7 AH 


Software

OpenGL info

OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: Quadro NVS 140M/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 169.04

Probleme

Alle wie vorher beschrieben


Komplett und nicht gekürtzt

[    0.000000] ACPI: APIC 7EECBBC0, 0068 (r1 LENOVO TP-7L        2100 LNVO        1)
[    0.000000] ACPI: MCFG 7EECBC28, 003C (r1 LENOVO TP-7L        2100 LNVO        1)
[    0.000000] ACPI: HPET 7EECBC64, 0038 (r1 LENOVO TP-7L        2100 LNVO        1)
[    0.000000] ACPI: SLIC 7EECBDF0, 0176 (r1 LENOVO TP-7L        2100  LTP        0)
[    0.000000] ACPI: BOOT 7EECBF66, 0028 (r1 LENOVO TP-7L        2100  LTP        1)
[    0.000000] ACPI: ASF! 7EECBF8E, 0072 (r16 LENOVO TP-7L        2100 PTL         1)
[    0.000000] ACPI: SSDT 7EEE26D9, 025F (r1 LENOVO TP-7L        2100 INTL 20050513)
[    0.000000] ACPI: SSDT 7EEE2938, 00A6 (r1 LENOVO TP-7L        2100 INTL 20050513)
[    0.000000] ACPI: SSDT 7EEE29DE, 04F7 (r1 LENOVO TP-7L        2100 INTL 20050513)
[    0.000000] ACPI: SSDT 7EEE2ED5, 01D8 (r1 LENOVO TP-7L        2100 INTL 20050513)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000)
[    0.000000] Built 1 zonelists.  Total pages: 515795
[    0.000000] Kernel command line: root=UUID=8aee51ed-1d21-42ac-9ffc-7a6b9cabf811 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2194.663 MHz processor.
[   17.652732] Console: colour VGA+ 80x25
[   17.653249] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   17.653850] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.836015] Memory: 2050096k/2079424k available (2015k kernel code, 28060k reserved, 915k data, 364k init, 1161920k highmem)
[   17.836033] virtual kernel memory layout:
[   17.836036]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   17.836038]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.836041]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   17.836043]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   17.836045]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   17.836048]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[   17.836050]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[   17.836056] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.836124] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   17.836265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   17.836274] hpet0: 3 64-bit timers, 14318180 Hz
[   17.917200] Calibrating delay using timer specific routine.. 4396.01 BogoMIPS (lpj=8792029)
[   17.917241] Security Framework v1.0.0 initialized
[   17.917252] SELinux:  Disabled at boot.
[   17.917276] Mount-cache hash table entries: 512
[   17.917498] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   17.917512] monitor/mwait feature present.
[   17.917515] using mwait in idle threads.
[   17.917524] CPU: L1 I cache: 32K, L1 D cache: 32K
[   17.917529] CPU: L2 cache: 4096K
[   17.917534] CPU: Physical Processor ID: 0
[   17.917537] CPU: Processor Core ID: 0
[   17.917541] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   17.917559] Compat vDSO mapped to ffffe000.
[   17.917583] Checking 'hlt' instruction... OK.
[   17.933373] SMP alternatives: switching to UP code
[   17.934167] Early unpacking initramfs... done
[   18.620049] ACPI: Core revision 20070126
[   18.620200] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.667614] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[   18.667642] SMP alternatives: switching to SMP code
[   18.667757] Booting processor 1/1 eip 3000
[   18.679367] Initializing CPU#1
[   18.756618] Calibrating delay using timer specific routine.. 4389.11 BogoMIPS (lpj=8778222)
[   18.756630] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   18.756640] monitor/mwait feature present.
[   18.756645] CPU: L1 I cache: 32K, L1 D cache: 32K
[   18.756649] CPU: L2 cache: 4096K
[   18.756653] CPU: Physical Processor ID: 0
[   18.756656] CPU: Processor Core ID: 1
[   18.756659] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   18.757565] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[   18.757607] Total of 2 processors activated (8785.12 BogoMIPS).
[   18.757823] ENABLING IO-APIC IRQs
[   18.758112] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   18.904028] checking TSC synchronization [CPU#0 -> CPU#1]:
[   18.924017] Measured 1207613 cycles TSC warp between CPUs, turning off TSC clock.
[    0.932000] Marking TSC unstable due to: check_tsc_sync_source failed.
[    0.936000] Brought up 2 CPUs
[    1.056000] migration_cost=4000
[    1.056000] Booting paravirtualized kernel on bare hardware
[    1.056000] Time: 13:30:54  Date: 05/06/108
[    1.056000] NET: Registered protocol family 16
[    1.056000] EISA bus registered
[    1.056000] ACPI: bus type pci registered
[    1.056000] PCI: PCI BIOS revision 3.00 entry at 0xfdda7, last bus=24
[    1.056000] PCI: Using configuration type 1
[    1.056000] Setting up standard PCI resources
[    1.064000] ACPI: EC: Found ECDT
[    1.076000] ACPI: System BIOS is requesting _OSI(Linux)
[    1.076000] ACPI: Please test with "acpi_osi=!Linux"
[    1.076000] Please send dmidecode to linux-acpi@vger.kernel.org
[    1.092000] ACPI: Interpreter enabled
[    1.092000] ACPI: (supports S0 S3 S4 S5)
[    1.092000] ACPI: Using IOAPIC for interrupt routing
[    1.108000] ACPI: EC: GPE=0x12, ports=0x66, 0x62
[    1.112000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.112000] PCI: Probing PCI hardware (bus 00)
[    1.116000] PCI: Transparent bridge - 0000:00:1e.0
[    1.116000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.116000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    1.116000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[    1.116000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    1.116000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    1.120000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    1.120000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    1.120000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    1.128000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[    1.128000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    1.128000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    1.128000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    1.128000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    1.128000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    1.128000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    1.132000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    1.132000] ACPI: Power Resource [PUBS] (on)
[    1.132000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    1.132000] pnp: PnP ACPI init
[    1.132000] ACPI: bus type pnp registered
[    1.140000] pnp: PnP ACPI: found 10 devices
[    1.140000] ACPI: ACPI bus type pnp unregistered
[    1.140000] PnPBIOS: Disabled by ACPI PNP
[    1.140000] PCI: Using ACPI for IRQ routing
[    1.140000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    1.260000] NET: Registered protocol family 8
[    1.260000] NET: Registered protocol family 20
[    1.260000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[    1.260000] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    1.260000] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    1.260000] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[    1.260000] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    1.260000] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    1.260000] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
[    1.260000] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[    1.264000] Time: hpet clocksource has been installed.
[    1.264000] Switched to high resolution mode on CPU 0
[    1.264000] Switched to high resolution mode on CPU 1
[    1.292000] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[    1.292000] PCI: Bridge: 0000:00:01.0
[    1.292000]   IO window: 2000-2fff
[    1.292000]   MEM window: d4000000-d6ffffff
[    1.292000]   PREFETCH window: e0000000-efffffff
[    1.292000] PCI: Bridge: 0000:00:1c.0
[    1.292000]   IO window: 3000-3fff
[    1.292000]   MEM window: fc000000-fdffffff
[    1.292000]   PREFETCH window: f8000000-f80fffff
[    1.292000] PCI: Bridge: 0000:00:1c.1
[    1.292000]   IO window: 4000-4fff
[    1.292000]   MEM window: dc100000-df2fffff
[    1.292000]   PREFETCH window: dfd00000-dfdfffff
[    1.292000] PCI: Bridge: 0000:00:1c.2
[    1.292000]   IO window: 5000-5fff
[    1.292000]   MEM window: d8000000-d9ffffff
[    1.292000]   PREFETCH window: dfa00000-dfafffff
[    1.292000] PCI: Bridge: 0000:00:1c.3
[    1.292000]   IO window: 6000-6fff
[    1.292000]   MEM window: d0000000-d1ffffff
[    1.292000]   PREFETCH window: df700000-df7fffff
[    1.292000] PCI: Bridge: 0000:00:1c.4
[    1.292000]   IO window: 7000-7fff
[    1.292000]   MEM window: cc000000-cdffffff
[    1.292000]   PREFETCH window: df400000-df4fffff
[    1.292000] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[    1.292000]   IO window: 00008000-000080ff
[    1.292000]   IO window: 00008400-000084ff
[    1.292000]   PREFETCH window: f4000000-f7ffffff
[    1.292000]   MEM window: 80000000-83ffffff
[    1.292000] PCI: Bridge: 0000:00:1e.0
[    1.292000]   IO window: 8000-bfff
[    1.292000]   MEM window: f8100000-fbffffff
[    1.292000]   PREFETCH window: f4000000-f7ffffff
[    1.292000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.292000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.292000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17
[    1.292000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.292000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18
[    1.292000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.292000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19
[    1.292000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.292000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20
[    1.292000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    1.292000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 17
[    1.292000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    1.292000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
[    1.292000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    1.292000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.292000] PCI: Setting latency timer of device 0000:15:00.0 to 64
[    1.292000] NET: Registered protocol family 2
[    1.340000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.340000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    1.340000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.340000] TCP: Hash tables configured (established 131072 bind 65536)
[    1.340000] TCP reno registered
[    1.352000] checking if image is initramfs... it is
[    2.700000] Freeing initrd memory: 7065k freed
[    2.700000] Simple Boot Flag at 0x35 set to 0x1
[    2.704000] audit: initializing netlink socket (disabled)
[    2.704000] audit(1212759055.264:1): initialized
[    2.704000] highmem bounce pool size: 64 pages
[    2.708000] VFS: Disk quotas dquot_6.5.1
[    2.708000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.708000] io scheduler noop registered
[    2.708000] io scheduler anticipatory registered
[    2.708000] io scheduler deadline registered
[    2.708000] io scheduler cfq registered (default)
[    2.708000] Boot video device is 0000:01:00.0
[    2.708000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:01.0:pcie00]
[    2.708000] Allocate Port Service[0000:00:01.0:pcie02]
[    2.708000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:1c.0:pcie00]
[    2.708000] Allocate Port Service[0000:00:1c.0:pcie02]
[    2.708000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:1c.1:pcie00]
[    2.708000] Allocate Port Service[0000:00:1c.1:pcie02]
[    2.708000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:1c.2:pcie00]
[    2.708000] Allocate Port Service[0000:00:1c.2:pcie02]
[    2.708000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:1c.3:pcie00]
[    2.708000] Allocate Port Service[0000:00:1c.3:pcie02]
[    2.708000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    2.708000] assign_interrupt_mode Found MSI capability
[    2.708000] Allocate Port Service[0000:00:1c.4:pcie00]
[    2.708000] Allocate Port Service[0000:00:1c.4:pcie02]
[    2.708000] isapnp: Scanning for PnP cards...
[    3.068000] isapnp: No Plug & Play device found
[    3.108000] Real Time Clock Driver v1.12ac
[    3.108000] hpet_resources: 0xfed00000 is busy
[    3.108000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    3.112000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    3.112000] input: Macintosh mouse button emulation as /class/input/input0
[    3.112000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.120000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.120000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.120000] mice: PS/2 mouse device common for all mice
[    3.120000] EISA: Probing bus 0 at eisa.0
[    3.120000] Cannot allocate resource for EISA slot 1
[    3.120000] Cannot allocate resource for EISA slot 2
[    3.120000] Cannot allocate resource for EISA slot 3
[    3.120000] Cannot allocate resource for EISA slot 4
[    3.120000] Cannot allocate resource for EISA slot 5
[    3.120000] Cannot allocate resource for EISA slot 6
[    3.120000] Cannot allocate resource for EISA slot 7
[    3.120000] Cannot allocate resource for EISA slot 8
[    3.120000] EISA: Detected 0 cards.
[    3.120000] TCP cubic registered
[    3.120000] NET: Registered protocol family 1
[    3.120000] Using IPI No-Shortcut mode
[    3.120000]   Magic number: 12:305:533
[    3.120000] Freeing unused kernel memory: 364k freed
[    3.132000] input: AT Translated Set 2 keyboard as /class/input/input1
[    4.580000] AppArmor: AppArmor initialized<5>audit(1212759057.264:2):  type=1505 info="AppArmor initialized" pid=1248
[    4.660000] fuse init (API version 7.8)
[    4.668000] Failure registering capabilities with primary security module.
[    4.712000] ACPI: SSDT 7EEE1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
[    4.712000] ACPI: SSDT 7EEE1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
[    4.716000] Monitor-Mwait will be used to enter C-1 state
[    4.716000] Monitor-Mwait will be used to enter C-2 state
[    4.716000] Monitor-Mwait will be used to enter C-3 state
[    4.716000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    4.716000] ACPI: Processor [CPU0] (supports 8 throttling states)
[    4.716000] ACPI: SSDT 7EEE1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
[    4.716000] ACPI: SSDT 7EEE1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
[    4.720000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    4.720000] ACPI: Processor [CPU1] (supports 8 throttling states)
[    4.724000] ACPI: Thermal Zone [THM0] (32 C)
[    4.724000] ACPI: Thermal Zone [THM1] (28 C)
[    5.508000] usbcore: registered new interface driver usbfs
[    5.512000] usbcore: registered new interface driver hub
[    5.512000] usbcore: registered new device driver usb
[    5.512000] USB Universal Host Controller Interface driver v3.0
[    5.512000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 17
[    5.512000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    5.512000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.512000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.512000] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001860
[    5.512000] usb usb1: configuration #1 chosen from 1 choice
[    5.512000] hub 1-0:1.0: USB hub found
[    5.512000] hub 1-0:1.0: 2 ports detected
[    5.616000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18
[    5.616000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    5.616000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.616000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    5.616000] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001880
[    5.616000] usb usb2: configuration #1 chosen from 1 choice
[    5.616000] hub 2-0:1.0: USB hub found
[    5.616000] hub 2-0:1.0: 2 ports detected
[    5.620000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[    5.620000] Copyright (c) 1999-2006 Intel Corporation.
[    5.636000] SCSI subsystem initialized
[    5.644000] libata version 2.21 loaded.
[    5.720000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[    5.720000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    5.720000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.720000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    5.720000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[    5.720000] usb usb3: configuration #1 chosen from 1 choice
[    5.720000] hub 3-0:1.0: USB hub found
[    5.720000] hub 3-0:1.0: 2 ports detected
[    5.824000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
[    5.824000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    5.824000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.824000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    5.824000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000018c0
[    5.824000] usb usb4: configuration #1 chosen from 1 choice
[    5.824000] hub 4-0:1.0: USB hub found
[    5.824000] hub 4-0:1.0: 2 ports detected
[    5.856000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    5.928000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
[    5.928000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    5.928000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.928000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    5.928000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018e0
[    5.928000] usb usb5: configuration #1 chosen from 1 choice
[    5.928000] hub 5-0:1.0: USB hub found
[    5.928000] hub 5-0:1.0: 2 ports detected
[    6.000000] Clocksource tsc unstable (delta = -187590933 ns)
[    6.032000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
[    6.032000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    6.032000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.032000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    6.032000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    6.032000] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfe226c00
[    6.036000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.036000] usb usb6: configuration #1 chosen from 1 choice
[    6.036000] hub 6-0:1.0: USB hub found
[    6.036000] hub 6-0:1.0: 4 ports detected
[    6.052000] usb 1-2: configuration #1 chosen from 1 choice
[    6.056000] usb 1-2: can't set config #1, error -71
[    6.056000] usb 1-2: USB disconnect, address 2
[    6.140000] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17
[    6.140000] PCI: Setting latency timer of device 0000:00:19.0 to 64
[    6.192000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:88:f3:ad
[    6.316000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    6.316000] ata_piix 0000:00:1f.1: version 2.11
[    6.316000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
[    6.316000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    6.316000] scsi0 : ata_piix
[    6.316000] scsi1 : ata_piix
[    6.316000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
[    6.316000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
[    6.472000] ata2: port disabled. ignoring.
[    6.472000] ahci 0000:00:1f.2: version 2.2
[    6.472000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
[    6.472000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
[    6.904000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[    7.084000] usb 1-2: configuration #1 chosen from 1 choice
[    7.476000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
[    7.476000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    7.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    7.476000] scsi2 : ahci
[    7.476000] ata3: SATA max UDMA/133 cmd 0xf887a100 ctl 0x00000000 bmdma 0x00000000 irq 16
[    7.964000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.012000] ata3.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
[    8.012000] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    8.016000] ata3.00: configured for UDMA/133
[    8.016000] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
[    8.016000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
[    8.016000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    8.016000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    8.016000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    8.016000] ehci_hcd 0000:00:1d.7: debug port 1
[    8.016000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    8.016000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe227000
[    8.020000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    8.020000] usb usb7: configuration #1 chosen from 1 choice
[    8.020000] hub 7-0:1.0: USB hub found
[    8.020000] hub 7-0:1.0: 6 ports detected
[    8.032000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    8.032000] sd 2:0:0:0: [sda] Write Protect is off
[    8.032000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.032000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.032000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    8.032000] sd 2:0:0:0: [sda] Write Protect is off
[    8.032000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.032000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.032000]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    8.076000] sd 2:0:0:0: [sda] Attached SCSI disk
[    8.084000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    8.504000] Attempting manual resume
[    8.504000] swsusp: Resume From Partition 8:6
[    8.504000] PM: Checking swsusp image.
[    8.508000] PM: Resume from disk failed.
[    8.548000] kjournald starting.  Commit interval 5 seconds
[    8.548000] EXT3-fs: mounted filesystem with ordered data mode.
[   18.968000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.968000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.088000] Linux agpgart interface v0.102 (c) Dave Jones
[   19.488000] input: PC Speaker as /class/input/input2
[   20.096000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
[   20.096000] serio: Synaptics pass-through port at isa0060/serio1/input0
[   20.140000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   20.148000] nvidia: module license 'NVIDIA' taints kernel.
[   20.408000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c4]
[   20.544000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[   20.544000] Socket status: 30000006
[   20.544000] pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
[   20.544000] cs: IO port probe 0x8000-0xbfff: clean.
[   20.544000] pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
[   20.544000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
[   20.564000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   20.564000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   20.564000] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.04  Wed Nov 14 16:44:14 PST 2007
[   20.704000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.25ds
[   20.704000] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   20.704000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
[   20.704000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   20.704000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   20.756000] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[   20.876000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   21.156000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
[   21.160000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   21.192000] cs: IO port probe 0x100-0x3af: clean.
[   21.196000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   21.196000] cs: IO port probe 0x820-0x8ff: clean.
[   21.200000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.200000] cs: IO port probe 0xa00-0xaff: clean.
[   21.684000] loop: module loaded
[   21.756000] lp: driver loaded but no devices found
[   21.968000] Adding 3470000k swap on /dev/sda6.  Priority:-1 extents:1 across:3470000k
[   22.340000] EXT3 FS on sda2, internal journal
[   22.616000] hda_intel: azx_get_response timeout, switching to polling mode...
[   24.956000] ACPI: ACPI Dock Station Driver 
[   24.960000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
[   24.960000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
[   24.960000] ACPI: Error installing bay notify handler
[   24.960000] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
[   25.012000] input: Power Button (FF) as /class/input/input4
[   25.012000] ACPI: Power Button (FF) [PWRF]
[   25.060000] input: Lid Switch as /class/input/input5
[   25.060000] ACPI: Lid Switch [LID]
[   25.060000] input: Sleep Button (CM) as /class/input/input6
[   25.060000] ACPI: Sleep Button (CM) [SLPB]
[   25.156000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   25.160000] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   25.208000] ACPI: Battery Slot [BAT0] (battery present)
[   25.220000] ACPI: Battery Slot [BAT1] (battery present)
[   25.276000] ACPI: AC Adapter [AC] (off-line)
[   25.876000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   26.100000] input: TPPS/2 IBM TrackPoint as /class/input/input7
[   28.716000] Failure registering capabilities with primary security module.
[   28.812000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
[   28.812000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
[   29.132000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[   29.140000] ppdev: user-space parallel port driver
[   29.500000] audit(1212751882.729:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5189 profile="/usr/sbin/cupsd"
[   29.588000] apm: BIOS not found.
[   30.656000] thinkpad_acpi: ThinkPad ACPI Extras v0.14
[   30.656000] thinkpad_acpi: http://ibm-acpi.sf.net/
[   30.656000] thinkpad_acpi: ThinkPad EC firmware 7KHT24WW-1.08
[   30.852000] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   30.852000] vboxdrv: Successfully done.
[   31.416000] Bluetooth: Core ver 2.11
[   31.416000] NET: Registered protocol family 31
[   31.416000] Bluetooth: HCI device and connection manager initialized
[   31.416000] Bluetooth: HCI socket layer initialized
[   31.436000] Bluetooth: L2CAP ver 2.8
[   31.436000] Bluetooth: L2CAP socket layer initialized
[   31.504000] Bluetooth: RFCOMM socket layer initialized
[   31.504000] Bluetooth: RFCOMM TTY layer initialized
[   31.504000] Bluetooth: RFCOMM ver 1.8
[   47.880000] input: Virtual ThinkFinger Keyboard as /class/input/input8
[   56.616000] NET: Registered protocol family 10
[   56.620000] lo: Disabled Privacy Extensions
[   56.620000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   56.620000] ADDRCONF(NETDEV_UP): wlan0: link is not ready